Before you start
Add-on licences you buy in the store are assigned to control systems in the grid view. Assigning a licence takes effect straight away, so there's no Save step.
- Reload grid view after buying. Grid view loads your licences when it opens, so reload the page to see licences you bought while it was open.
- You need an integrator account with permission to edit the site.
- The control system has to support the add-on. If it doesn't, its License cell shows Not supported. If some control systems run firmware too old for an add-on, a banner at the top of the tab says how many and which version they need.
Opening the add-on views
- Open the site and go to Grid view.
- Select the Add-ons tab at the top.
- Select the add-on you want, for example BACnet, DMX, ECD, Modbus, Onsite, Somfy, Third party interface or Virtual switch.
Each control system has a row, and its licence is in the License column. Add-ons with more than one licence split that column, for example Standard, Advanced and Serial port on Third party interface.
What the License column shows
- No license: nothing is assigned yet.
- Subscription: a subscription from the store is assigned.
- Lifetime: a lifetime licence from the store is assigned.
- Lifetime (carried over): the add-on was licensed before the store and keeps working.
- Included: the control system comes with this add-on, so it doesn't need a licence.
- Not supported: the control system can't run this add-on.
Hover over a cell for more detail, for example "Please purchase a BACnet license for this control system".
Assigning a licence
- Select the control system's License cell and open its list. The options show how many licences you have left, for example Subscription (4 remaining).
- Pick Lifetime or Subscription. If there's nothing else to decide, the licence is assigned straight away.
- If a dialog opens, answer what it asks:
- Organisation: when licences were bought by more than one organisation, pick whose licences to use.
- Assign a lifetime license?: a lifetime licence is assigned to the control system permanently and can't be moved or undone. Yes is available after a 5 second countdown. Tick Do not show this warning again until the page is refreshed if you're assigning several.
- Onsite: the licence is assigned immediately and takes the control system offline.
- Select Confirm or Yes.
The cell turns grey while the licence is assigned, then shows the new licence, and the remaining counts go down.
Add-ons bought by amount
Some add-ons are licensed by amount rather than per control system: ECD (first-party and third-party ECDs), Lcm ECG & ECD limit, Virtual switch and Modbus. For these:
- Picking Lifetime or Subscription asks How many extra licenses? Enter the amount to add to each control system. On the ECD tab, also pick the License type, first party or third party ECDs.
- To add more to one control system that already has a licence, pick Add amount in its License cell.
- To set a new total, type it in the amount column, for example Switch count or Device limit. The Change the licensed amount? dialog shows each control system's change and how many licences it takes. Pick Licensed as Lifetime or Subscription if you have both.
You can't lower an amount here, or go above what the control system can hold.
Assigning to many control systems
Select several License cells, drag-fill down the column, or copy a cell and paste it into others. Copying a licence on an add-on bought by amount copies the amount too. You get one dialog for each tenancy in the selection.
If you don't have enough licences for every control system, the dialog lists the ones that won't be changed. After you confirm, those cells show "No add-on licenses remaining, please purchase more".
If you have no licences left at all, an Out of licenses message opens instead. Its store link opens the store at that add-on so you can buy more.
Site and tenancy licences
Licences bought for the site can be used on any control system. Licences bought for a tenancy can only be used on control systems in that tenancy, and are used before the site's. The remaining counts include both.
Changing or removing a licence
- Subscriptions can be removed by picking No license. This happens straight away with no confirmation, and the licence becomes available to assign again. You can also change a subscription to a lifetime licence.
- Lifetime licences can't be removed, moved or changed back in grid view.
If something goes wrong
A cell that couldn't be changed turns red. Hover over it to see why:
- No add-on licenses remaining, please purchase more: there weren't enough licences for this control system.
- Failed to assign the add-on license: the change didn't go through, and the cell has gone back to what it was. Try again.
- Add-on licenses cannot be taken back from a control system here: you entered an amount lower than the current one.
- More add-on licenses than this control system can hold: you entered an amount above the control system's limit.
To clear a red amount cell, right-click it and select Revert value.
Comments
0 comments
Article is closed for comments.