Scanning the sensor into the APP

To scan the sensor into the app:

1. Ensure the sensor is newly installed and not already connected to a control system. If it is already on a control system, you may need to re-enable the BLE connection from the cloud.

2. Stand near the sensor and press the Scan button. The sensor should then appear in the scan list.

3. Select the sensor and allow the app to download all current settings.

4. Once the scan is complete, the sensor will display the commissioning window, where you can configure the device.

If you need to rescan the sensor settings, press the Download arrow in the top-right corner while in the commissioning window. Alternatively, you can return to the original scanning screen and scan the device again.