The smart driver by default is set as standalone mode with inbuilt application controller send BROADCAST lighting commands on the DALI line. It can be configured to target individual groups using the zencontrol express Android application (available on the Google Play store).
If the smart driver detects any ECG addressing commands (i.e. ECG_INITIALISE, ECG_TERMINATE, etc.) the device will stop sending BROADCAST lighting commands and internally control its own LED output.
If the smart driver detects any ECD addressing commands (i.e. ECD_INITIALISE, ECD_TERMINATE, etc.) on the DALI line, the driver disables all standalone mode operating and will send ECD events as per IEC 62386-103 and can be used with any DALI-2 compliant application controller.
Comments
0 comments
Article is closed for comments.