Mode | Description | Instance Types Configured | First Introduced | |
0x00 | Standard | In this mode the Smart Driver enables and expects there to be a switched active momentary button (301), a sensor plugged into the smart sensor port with occupancy* (303) and lux (304). Entering this mode disables automatic detection mode. | Manually | All versions |
0x80 | Automatic | In this mode the Smart Driver goes into an automatic detection mode where the ECD will detect if it has a sensor plugged into the smart sensor port*, whether the switched active input is active, and whether the switched active is momentary (301) or indicates occupancy (303)**. Entering this mode triggers the Smart Driver to restart its automatic detection mode and timeout. | Automatically | All versions |
0x81 | Switched Active Push Button | In this mode, the Smart Driver functions exactly the same as Automatic mode, with the exception that it always treats the switched active input only as a momentary button (301). When Application Controller is active, short presses toggle OFF/RECALL MAX, and long presses dim. | Automatically | All versions |
0x82 | Switched Active Absolute Input | In this mode, the Smart Driver functions exactly the same as Automatic mode, with the exception that it always treats the switched active input as an absolute position input (302). When Application Controller is active, a transition to active generates a RECALL MAX and a transition to inactive generates an OFF. | Automatically | All versions |
0x83 | Switched Active Sensor | In this mode, the Smart Driver functions exactly the same as Automatic mode, with the exception that it always treats the switched active input as a sensor input (303). When Application Controller is active, the warn level is 1% by default. | Automatically | All versions |
0x84 | Switched Active Sensor Warn 2.5% | In this mode, the Smart Driver functions exactly the same as Automatic mode, with the exception that it always treats the switched active input as a sensor input (303). When Application Controller is active, the warn level is 2.5% by default. | Automatically | All versions |
0x85 | Switched Active Sensor Warn 25% | In this mode, the Smart Driver functions exactly the same as Automatic mode, with the exception that it always treats the switched active input as a sensor input (303). When Application Controller is active, the warn level is 25% by default. | Automatically | All versions |
0x86 | Switched Active Central Battery | In this mode, the Smart Driver functions exactly the same as Automatic mode, with the exception that it disables the switched active ECD instance, instead directly monitoring the switched active input as a trigger to enter emergency mode. | Automatically | All versions |
0x87 | Application Controller Mode | In this mode, the Smart Driver functions exactly the same as Automatic mode, with the exception that it forces the Application Controller to be on and remain on regardless of having an ECD address or any event which would otherwise disable it. | Automatically | All versions |
0x88 | Manual Instance Types | In this mode the Smart Driver does not detect what is plugged into the smart sensor port or connected to the switched active input. Upon entry to this operating mode, every instance is disabled, and each input then presents whichever instance type has been configured for it with SET INSTANCE TYPE; an input left without an instance type stays disabled, including the switched active input. The sensor selection is applied as a pair - configuring occupancy (303) on the PIR input, or lux (304), enables both PIR and lux and disables the microwave instance if it was enabled, while configuring occupancy (303) on the microwave input enables microwave and disables PIR and lux. | Manually | 0.110 |
Every mode marked Manually in the Instance Types Configured column also prevents the device types being configured automatically, because automatic detection runs on the product as a whole. So if the ECD operating mode is changed to one marked Manually, the ECG operating mode must also be changed to one marked Manually - see the Device Types Configured column in the Smart Driver ECG Operating Modes article.
* Sensor type will be automatically detected
** Switched active type is automatically detected based on how long the switched active input is active for; <30s is detected as 301, >30s is detected as 303
Comments
0 comments
Article is closed for comments.