Controller versions above 0.9.2 support temporarily falling back to DHCP by doing the following 10 times:
- Unplugging the network cable
- Waiting 1 second
- Replugging the network cable
The DHCP on the controller will be temporarily enabled and any pending cloud network settings will be written out (finishes with a reboot). If there are no cloud network settings, the next time the controller reboots it will return to its original network configuration.
Please note this has no effect if the system is already using DHCP.
If your controller is not a room controller, you will also be able to use a button press sequence to achieve this - see this article.
Comments
0 comments
Article is closed for comments.