zencontrol sensor operating modes

zencontrol sensor operating modes by firmware version:

A PIR sensitivity of Normal means that it is more sensitive to movement. A sensitivity of Low means the opposite so it is less sensitive to movement.

A Lux sensitivity of Low means that the sensor will saturate with bright lights but means that it gives you better resolution which makes it more suitable for indoor use. A sensitivity of High means that the sensor allows measurement of brighter lights before being saturated however it loses resolution as a result making it ideal for using this for outdoor use.

The LED mode signifies whether the LED of the sensor will function normally or will be turned off altogether.

To set operating mode follow the command sequence below:

1. Set DTR0 -> Operation mode
2. SET OPERATING MODE -> Repeat within 150ms

The operating mode can be changed on zencontrol control systems on the ECD page of grid view.