Actions
Actions can be found in the Actions tab in Composer.
Commission with zencontrol
Scans the zencontrol Application Controller for all devices and automatically creates Control4 driver instances. This is the primary setup action for the integration.
Sync with zencontrol
Refreshes information from the Application Controller and notifies all child devices to synchronise. Use this after making changes in the zencontrol Cloud.
Reset All Log Levels
Sets the log level across all zencontrol drivers connected to this controller. Useful for toggling between debugging and production modes. A good default is Warning.
Toggle Fitting Number Visibility
Show or hide fitting numbers in device display names across all child drivers. When shown, names are prefixed with the fitting number (e.g. "0.2: Device Name").
Toggle Device Name Visibility
Show or hide the GTIN product name in device display names across all child drivers.
Toggle Device Type Name Visibility
Show or hide the device type suffix (e.g. "(Relay)", "(LED)", "(Colour Tc)") in device display names across all child drivers.
Toggle Location Label Visibility
Show or hide the zencontrol location label in device display names across all child drivers.
Toggle Room Group Navigator Visibility
Show or hide group controllers in the Navigator location menu across all child drivers.
Toggle Device Navigator Visibility
Show or hide individual devices in the Navigator location menu across all child drivers.
Variables
| Variable | ID | Type | Description |
|---|---|---|---|
IS_ONLINE | 1001 | Boolean | Set to false when the controller fails to respond for 30 seconds. Can be used to trigger email notifications or show Navigator announcements. |
CURRENT_PROFILE | 1002 | Integer | The current profile number active on the controller. Can be used to trigger Control4 behaviour on profile change (e.g. switching to after-hours or emergency). |
Comments
0 comments
Article is closed for comments.