Adjust the light level using the “step up/down/off button” until the desired dusk level is reached. After the desired level for the luminaire to turn on at is reached use the “Set dusk level” button to enable dusk mode.
- The dusk level is the light level the luminaire will turn on if the light falls below this level
- Enabling dusk mode will disable lux tracking mode
- Disable lux/dusk button will disable both modes
- Dusk mode only works when there is no external application controller i.e. If the device is connected to DALI and addressed by the application controller all standalone modes will be disabled
What is dusk mode?
Dusk mode will enable the luminaire to turn on if the light level falls below a set light level.