How do I set lux tracking mode with zc-ir-ctrl-com?

Adjust the light level using the “step up/down button” until the desired light level is achieved in the task area. After the desired light level in the task area is achieved use the “Set lux level” button to enable lux tracking mode. The luminaire with then use step up/down commands automatically to maintain the desired light level.

Notes:

• Enabling lux tracking mode will disable dusk mode
• Disable lux/dusk button will disable both modes
• Lux tracking mode only works when there is no external application controller i.e. If the device is connected to DALI and addressed by the application controller all standalone modes will be disabled

What is dusk mode?

Dusk mode will enable the luminaire to turn on if the light level falls below a set light level.